GALOPPINO
USAGE AND MAINTANENCE MANUAL
Manual no.
Ed.
Date
Pag.
MCA1001-EN-ED05
05
12/09/14
17/31
This document is the property of CRAMARO TS s.r.l. and cannot be reproduced, even if only partially, without the written authorisation
of the company
Pag 17
+
−
STD ELECTRICAL SYSTEM DIAGRAM
1 ) CONTROL UNIT
2 ) CONNECTION PLUG
3 ) ELECTRICAL CONTACTS
4 ) VEHICLE BATTERY
5 ) MOTOR REDUCTOR
6 ) LATERAL JUNCTION
8 ) 2 CABLES THAT PASS THROUGH THE ARC AND
IN THE LOWER POCKET OF THE TARPAULIN
9 ) FRONT JUNCTION
10 ) CONTROL UNIT CONNECTIONS COVER
11) REDUCER
12) ELEMENT OF TRANSMISSION REDUCERS
JUNCTION IN ARC – LATERAL JUNCTION – FRONT JUNCTION – 24 V BATTERY - MOTOR
The electrical cables (8) are inserted in the appropriate internal pocket of the tarpaulin, pas within the rear of the
arc and connected with the wires ( these also pass within the final arc) that come from the motor placed at the
extremity of the same arc. The connection takes place through a multi-point terminal.
The control unit is usually positioned
on the side at the front of the chassis
(driver’s side) but may also be positioned
within the cab, in this case an express
request must be made in the order and the appropriate supplementary connection plugs will be provided in an
additional assembly kit.
