Craig CMP738b, Owner'S Manual

Page: 7 / 26

USB Host (Full size USB port)
This device supports USB device for extending the memory size, or USB Thumb Driver/3G Driver,
inserts it to the USB Host on the side of unit.
Notes:
A. Before replacing the USB driver, make sure the unit has been powered off.
B. For 3G USB drive or USB thumb drive connection, check (icon
will turn to green) the "USB
mode Select" in "Host Mode" in setting menu.
C. When inserting the USB driver, make sure the direction you selected is correct. Never insert
violently to avoid damaging the USB driver or the unit. If it doesn’t work, please check if the
direction is correct.
Power On/Off the Device
Reset
Notes:
Like your computer, after turning on the Device, you may have to wait a short while to let
the operating system boot up before the home page appears on the screen.
- 7 -
A. Press and hold the button approximate 5 seconds to power on the unit. Touch and slide the
key bar shown on the screen upward to unlock.
B. In power on mode, press the button to turn off the screen for saving battery power. Turn on
the screen again as the the procedures above.
C. To power off, press and hold the button until the "Device options" window pop up then tap the
"Power off" button. The "Power off" window will pop up, tap the "OK" button to power off the unit.
If the device becomes abnormal, halt, freeze. Press the RESET Button in the reset hole by the
supplied Touch Screen Pen to reset the device as the figure below:
H
D
M
I
D
C
I
N
M
IC
R
O
SD
U
SB T
O
P
C
U
SB
H
O
ST
PEN
M
IC
R
ES
ET