-13-
Playback of a DVD:
label side face up. Closed the tray by press the Open/Close ( ) button. The unit will start playback automatically.
3. During playback:
~ Press the or buttons repeatedly to search for a specific section forward/backward.
Press Play button to resume normal playback.
~ Press the or buttons repeatedly to skip to specific track.
~ Press button to pause, press button again to resume normal playback.
4. Press STOP button to stop playback. The player will remember the point where disc was stopped. Press
Play/Pause button again, playback will start from this point. To stop playback completely or to start again
from the beginning, press STOP button twice.
5.
OPERATIONS
Repeat Playback:
Playback of a CD:
~ Press the SUB VOL (Sub Woofer Volume) +/- button to adjust the volume level of base.
Note: When press the VOL/SUB VOL +/- buttons, make sure the Remote Control is face to the Main Amplifier.
~ Press the VOL (Volume) +/- buttons on the Remote Control or turning the Volume Knob on the Power Amplifier
to adjust volume level.
To power off, press the button to turn off the Player. The display will turn off and Standby Indicator will light.
label side face up. Closed the tray by press the Open/Close ( ) button. The unit will start playback automatically.
1. Connect the Home Theater and DVD Player together then power source as previous procedures, the Standby
Indicator on the DVD Player will light. Press the POWER ON/OFF button on the DVD Player or Remote
will turned off and the display will light.
position to power on the Amplifier. The Indicator on the front of Amplifier will light.
2. Press the Open/Close ( ) button on the DVD player to open the disc tray. Place the disc on the center of tray with
Control. The Standby Indicator
to ON
1. Connect the Home Theater and DVD Player together then power source as previous procedures, the Standby
Indicator on the DVD Player will light. Press the POWER ON/OFF button on the DVD Player.
will turned off and the display will light.
position to power on the Amplifier. The Power on Indictor on the front of Amplifier will light. Press the INPUT
The Standby
Indicator
to ON
Press the Power ON/OFF Switch on the rear of Power Amplifier
2. Press the Open/Close ( ) button on the DVD player to open the disc tray. Place the disc on the center of tray with
Press the INPUT button on the Remote Control to select the input source as audio input connection.
button to select the input source as audio input connection.
GREEN
The RED Indicator will
light.
Press the Power ON/OFF Switch on the rear
of Power Amplifier
The correspondent Indicator will light as:
Green: DVD inputs.
Orange: AUX inputs.
Press the AMP ON/OFF button on the Remote Control to turn off (standby) the Amplifier.
( For saving energy, always power off the Power Amplifier by press the Power ON/OFF Switch on the rear of the
If long period of time will not use, unplug the AC/DC Adaptor and the AC cord of
Amplifier to OFF position.
DVD Player from wall outlet.)
During playback, press the REPEAT button once; " Chapter" will appear on the screen then the current
Chapter will be playback repeatedly and continuously.
Press the REPEAT button twice; " Title" will appear on the screen then the current Title will be playback
repeatedly and continuously.
Press the REPEAT button the third time; " All" will appear on the screen then all files will be playback
repeatedly and continuously.
Press the REPEAT button repeatedly to turn off repeat mode.
