11
Fig. T
Cord Storage (Fig. T)
When your Wet/Dry Vac is not in use, it should be
unplugged from the outlet.
1. Wind the Power Cord clockwise (from the rear) around
the Cord Wrap area on back of Vac Motor Assembly.
2. To secure the cord, Snap the Power Cord into the Cord
Clip.
NOTE:
The entire length of the cord should be wound
around the Cord Wrap Area to eliminate any tripping
hazard created by a loosely hanging cord.
Fig. S
Accessory Storage (Fig. S)
The Accessories: Utility Nozzle, Dusting Brush, Car Nozzle,
and the Crevice Tool, may be stored at the bottom of the
Storage Rack, in the Accessory Storage Bin.
The Two Extension Wands may be stored in the Wand
Slots, located on either side of the Storage Rack.
Cord
Wrap
Area
Cord
C
L
OC
KW
I
SE
Fig. U
Diffuser Assembly (Fig. U)
Connect the Lanyard to the Attachment Tab on the Vac
Motor Assembly to keep the Diffuser attached to Vac when
using the Blower Port.
The Diffuser Cap can be used in the Exhaust Port of the
Wet/Dry Vac. Installing the Diffuser Cap will allow you to
diffuse the exhaust air in any direction and reduce the
intensity of the exhaust force.
Lanyard
Attachment
Tab
Diffuser
TOP VIEW
Accessories
Accessory
Storage Bin
Wand
Slots (2)
Extension
Wands (2)
Storage
Rack
SP7085-2 CMXEVBE179250.indb 11
10/24/19 12:48 PM
