background image

NOTICE 

 High pressure spray could damage fragile items includ-

ing glass.
•  DO NOT point spray gun at glass when using turbo spray tip.
•  NEVER aim spray gun at plants.

NOTICE

 

 Improper treatment of electric pressure washer could 

damage it and shorten its life.
•  If you have questions about intended use, call the customer 

helpline at 1-866-902-9690

•  DO NOT operate units with broken or missing parts, or with-

out protective housing or covers.

•  DO NOT by-pass any safety device on the electric pressure 

washer.

•  DO NOT modify the electric pressure washer in any way.
•  Before starting the electric pressure washer in cold weather, 

check all parts of the equipment to be sure ice has not 
formed there.

•  DO NOT move the electric pressure washer by pulling on 

hoses. Move unit using the transport handle supplied. 

•  This equipment is designed to be used only with Craftsman 

original and replacement parts. If other parts are used the 
user assumes all risks and liabilities.

      WARNING 

 Risk of eye or bodily injury. Spray could splash 

                          back, propel objects or cause internal harm 
                          resulting in serious injury.
•  Always wear indirect vented (chemical splash) safety 

goggles marked to comply with ANSI Z87.1 when using 
or in vicinity of this equipment. NEVER substitute safety 
glasses or dry-condition goggles for indirect vented 
safety goggles.

•  Know how to stop the pressure washer and bleed pres-

sure quickly. Be thoroughly familiar with the controls.

•  DO NOT allow CHILDREN to operate the electric pressure 

washer.

•  Keep operating area clear of all persons.
•  Inspect high pressure hose before each use. NEVER 

repair high pressure hose; replace it.

•  DO NOT repair leaking connections with sealant of any 

kind; replace o-rings and gaskets.

•  Keep hose connected to electric pressure washer and 

spray gun while system is pressurized.

•  ALWAYS point spray gun in safe direction while system 

is pressurized and squeeze spray gun trigger to release 
high pressure, every time you turn off the unit.

•  DO NOT aim spray gun at people or animals.
•  DO NOT drink from hose connected accessories.
•  DO NOT secure spray gun in open position.
•  DO NOT leave spray gun unattended while the electric 

pressure washer is in ON (I) position.

•  DO NOT use a spray gun which does not have a trigger 

lock or trigger guard in place and in working order.

•  Always be certain spray gun and accessories are cor-

rectly attached.

•  Stay alert – watch what you are doing.
•  DO NOT operate the product when fatigued or under the 

influence of alcohol or drugs.

•  Close supervision is necessary when this product is used 

near children.

•  Risk of Injection or Injury to Persons - Do not direct 

discharge stream at persons. 

•  DO NOT spray electrical apparatus and wiring.

      WARNING  

The high pressure stream of water that this 

 

equipment produces could cut through skin and 

 

its underlying tissues, resulting in serious injury and 

possible amputation. Spray gun traps high water pressure, 
even when motor is stopped and water is disconnected, which 
could result in serious injury.
•  NEVER aim spray gun at people, animals, or plants.
•  ALWAYS point spray gun in safe direction, squeeze spray 

gun trigger to release high pressure, every time you turn 
off pressure washer.

     WARNING 

 Risk of fire. Spraying flammable liquids could   

               result in death or serious injury.
 
 
• DO NOT spray flammable liquids.

     WARNING 

 Risk of fire. Overheated cord could result in death 

 

or serious injury.

• Uncoil cord completely prior to use.• DO NOT cover cord with 
any material.

     WARNING 

 This product contains lead and lead compounds, 

known to the State of California to cause birth defects or other 
reproductive harm. 

Wash your hands after handling this product.

 

 

4

Summary of Contents for 99016





























Reviews: