SAFETY INSTRUCTIONS cont.
5
1.
Do not force the power tool. Use the correct power tool for your application.
The
correct power tool will do the job better and safer at the rate for which it was designed.
2.
Do not use the power tool if the switch does not turn it on and off.
Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
3.
Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
4.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
5.
Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tools operation. If
damaged, have the power tool repaired before use.
Many accidents are caused by
poorly maintained power tools.
6.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
7.
Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool,
taking into account the working
conditions and the work to be performed.
Use of
the power tool for operations different from those intended could result in a hazardous
situation.
8.
Use clamps or another practical way to secure and support the workpiece to a
stable platform.
9.
Holding the work by hand or against your body leaves it unstable and may lead to
loss of control.
WARNING:
BE SURE to read and understand all instructions before
operating this power tool. Failure to follow all instructions listed below may
result in electric shock, fire and/or serious personal injury.
!
TOOL USE AND CARE SAFETY
WARNING:
Empty dust bag before storage to help prevent possible fire
hazard, especially when resin coating or linseed oil finishes have been sanded.
!
WARNING:
Do not permit fingers to touch
the terminals of plug when installing or removing
the plug from the outlet.
!
ELECTRICAL SAFETY
1.
Double insulated tools are equipped with a polarized
plug (one blade is wider than the other). This plug
will fit in a polarized outlet only one way.
If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a
qualified electrician
to install a
polarized outlet. Do not change the plug in any way.
Cover of
Grounded
Outlet Box
SAFETY INSTRUCTIONS
4
WARNING:
Read all safety warnings and instructions. Failure to follow
the warnings and instructions may result in electric shock, fire and/or
serious injury.
!
Save all warnings and instructions for future reference.
The term power tool in the warnings refers to your electric (corded)
power tool or battery-operated (cordless) power tool.
WORK AREA SAFETY
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the
dust or fumes.
3.
Keep children and bystanders away while operating a power tool.
Distractions can
cause you to lose control.
4.
Make your workshop childproof
with padlocks and master switches. Lock
tools away when not in use.
5.
MAKE SURE the work area has ample lighting
so you can see the work and that
there are no obstructions that will interfere with safe operation
BEFORE
using your
power tool.
PERSONAL SAFETY
1.
Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
2.
Use personal protective equipment. Always wear eye protection.
Protective
equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
3.
Prevent unintentional starting. Ensure the switch is in the off-position before
connecting to power source and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or energizing power tools that have
the switch on invites accidents.
4.
Remove any adjusting key or wrench before turning the power tool on.
A wrench
or a key left attached to a rotating part of the power tool may result in personal injury.
5.
Do not overreach. Keep proper footing and balance at all times.
This enables better
control of the power tool in unexpected situations.
6.
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewelry or long hair can be caught in
moving parts.
7.
If devices are provided for the connection of dust extraction and collection
facilities, ensure these are connected and properly used.
Use of dust collection
can reduce dust-related hazards.
