11
DESCRIPTION
Your Professional 5” Random Orbit Sander has a precision-built electric motor and it should
be connected to a 120-volt, 60-Hz AC ONLY power supply (normal household current).
DO NOT
operate on direct current (DC). The large voltage drop will cause a loss of power
and the motor will overheat. If the sander does not operate when plugged into correct
120-volt, 60-Hz AC ONLY outlet, check the power supply. This sander has a 8-ft, 2-wire
power cord (no adapter needed).
KNOW YOUR RANDOM ORBIT SANDER (Fig. 2)
NOTE: Before attempting to use your sander, familiarize yourself with all of the
operating features and safety requirements.
This Random Orbit Sander has the following features:
1.
Powerful 3.0 amp motor
provides the torque, power and durability for a variety
of continuous sanding applications.
2.
Variable speed 5,000 to 12,000 OPM orbits per minute (no-load speed)
is controlled
by variable speed dial.
Match with the correct speed and sandpaper grit to the surface
being sanded for either fast material removal or a fine, smooth finish.
3.
Random orbital action
with 1/8-in. orbit diameter helps to provide a swirl free finish.
4.
Ergonomically designed Palm Grip Handle with Molded-in Comfort Grip
for maximum balance, control, gripping comfort and reduced operator fatigue.
5.
Precision-tuned counterbalanced system
reduces vibration for smooth operation
and less operator fatigue.
UNPACKING cont.
PARTS LIST (Fig. 1)
4. Operator’s Manual
1. Sander
2. Dust Bag
Assembly
3. Vac Adapter
with dual
dust ports
10
1. Remove the
sander
from the
carton
and inspect it carefully to make sure
that no breakage or damage has occurred during shipping.
2. Do not discard any of the packing materials until all parts are accounted for.
3. Included with your sander is a
dust bag assembly,
with
vac adapter
.
4. If any of the parts are damaged or missing (refer to PARTS LIST below), return the
sander to your nearest Sears store or Craftsman outlet to have the sander replaced.
WARNING:
This power tool should NEVER be connected to the power
source when you are assembling parts, making adjustments, installing or
removing sandpaper, cleaning or when it is not in use. Disconnecting the sander
will prevent accidental starting, which could cause serious personal injury.
!
UNPACKING
WARNING:
If any parts are missing, DO NOT operate this power tool until
the missing parts are replaced. Failure to do so could result in possible serious
personal injury.
!
10. After long working periods external metal parts and accessories could be hot.
11. If possible, ensure the work-piece is firmly clamped to prevent movement.
12. Your sander is a hand held tool, do not clamp your sander.
13. Before sanding, check the area is free of nails, screws, etc.
14. Never stop the sander by applying a force to the base plate.
15. Only use paper in good condition. Do not use torn or worn paper.
16. Do not sand material containing asbestos due to a health risk.
17. Do not sand lead based paint due to the risk of lead poisoning.
18. Do not eat or drink in the working area of the sander.
19. Do not allow people to enter the working area without wearing a dust mask.
20. Where possible, seal off the working area to contain the dust for later removal.
21. Your tool is designed for dry sanding only, not wet sanding.
22. Your tool is designed for general purpose light polishing of wood and metals.
23. Do not sand magnesium material due to the risk of fire.
24.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct
others who may use this tool. If someone borrows this tool, make sure they have
these instructions also.
ADDITIONAL RULES FOR SAFE OPERATION cont.
SAFETY INSTRUCTIONS cont.
