page 11
It is recommended that you test fan before
finalizing installation. Test wall control (optional
installation) by locating ON/OFF slider switch on
wall control, then set to ON position. Test fan
speeds. Next, locate remote control. Test fan
speed with different fan speed buttons (1 - 6). If
the remote control operates the functions of the
fan, battery has been installed correctly. If the
wall and/or remote control do (does) not operate
the fan functions, refer to "Troubleshooting"
section to solve any issues before contacting
Customer Service.
Fan
must
be on LOW
before
setting the fan in
reverse. Use button to recirculate air
depending on the season. A ceiling fan will allow
you to raise your thermostat setting in summer
and lower your thermostat setting in winter
without feeling a difference in your comfort.
IMPORTANT
: Remote control (and wall control, if
applicable) must be synchronized with fan in
order to properly function.
11. Testing Your Fan.
CAUTION
:
“DO NOT DISPOSE OF BATTERIES IN FIRE, BATTERIES MAY EXPLODE OR LEAK.” - When
disposing of household alkaline batteries, it is best to check with your local and state recycling or
household hazardous waste coordinators concerning the specifics of the program in your area. You
may also locate a recycling center by calling 1-800-8-BATTERY or 1-877-2-RECYCLE or visit
www.epa.gov/epawaste/index.htm or www.earth911.org for more information.
WARNING
: Do not mix old and new batteries; Do not mix alkaline, standard (carbon - zinc), or rechargeable
(nickel - cadmium) batteries or equivalent.
Non-rechargeable batteries are not to be recharged; Do not mix different types of batteries such as alkaline,
carbon-zinc, or rechargeable batteries; Do not mix old and new batteries; Batteries are to be inserted with the
correct polarity; Exhausted batteries are to be removed from the product.
1
2
3
4
5
6
