page 7
7. Wiring.
(wiring for fan)
wire
connector
*
WARNING
: Turn off circuit breakers to current
fixture from breaker panel and be sure switch is
turned to the OFF position.
CAUTION
:
Be sure outlet box is properly grounded
and that a ground wire (
GREEN
or Bare) is present.
Make sure all electrical connections comply with
Local Codes or Ordinances and the National
Electrical Code. If you are unfamiliar with electrical
wiring or if the house/building wires are different
colors than those referred to in the instructions
below, please use a qualified electrician.
Note
:
Excess lead wire length from the fan can be
cut to the desired length and then stripped.
When fan is secured in place on the hanging
bracket, electrical wiring can be made as follows:
Connect
BLACK
and
BLUE
wires from fan to
BLACK
wire from ceiling. Connect
WHITE
wire
from fan to
WHITE
wire from ceiling. Connect all
GROUND
(
GREEN
) wires together from fan to
BARE
/
GREEN
wire from ceiling.
Use wire
connectors provided when making connections.
If you intend to control the fan light with a
separate light switch connect
BLUE
wire from fan
to the
BLACK
(or
RED
)
supply from the
independent switch.
* Wrap each wire connector separately with
electrical tape as an extra safety measure.
white
black supply wire
white supply wire
ground
(green or bare)
ground
(green
or bare)
from fan
black
white
blue
black
from ceiling
8. Wiring - Wall Control
Remove existing wall switch. Wire the
wall control
as
shown in diagram at right.
Connect
BLACK/WHITE
wire from wall control to
BLACK
(
AC IN L
)
wire in outlet box. Connect
BLACK
wire from
wall control to
BLACK
(
AC IN N
) wire from
fan (inside the outlet box). Connect
BLUE
wire from
wall control to
BLUE
wire from light in the outlet
box.
Connect
GREEN/YELLOW
ground wire from
wall control to ground wire in the outlet box.
Use
wire connectors provided when making
connections.
*Wrap each wire connector separately with
electrical tape as an extra safety measure. Gently
push wires and taped wire connectors into outlet
box.
Attach wall control to outlet box and secure with
screws from original wall switch. Attach plate
(included) to wall control using 2 screws provided
with the wall control.
plate
wall control
plate
screw
outlet box
BLACK
(AC IN N
from fan)
BLACK
BLUE
GREEN/
YELLOW
BLACK
(AC IN L)
BLACK/WHITE
green/
bare
ground
BLUE
(wiring for wall control)
