page 10
LED light
kit
11. LED Light Kit Assembly Option.
Remove 3 screws from outer edge of switch
housing (at top of light kit fitter).
Connect male plug from motor housing to
female plug from switch housing, matching up
the colors on the male plug with the colors on
the female plug for correct fit. Be sure that
plugs connect securely.
Carefully arrange wiring within switch
housing. Align holes in switch housing with
holes in switch housing plate. Re-insert screws
that were previously removed and securely
tighten all 3 screws with a Phillips screwdriver.
Locate slots on shade and align with nodules
on underside of LED light kit.
Gently push up
on shade and turn
to the RIGHT (clockwise)
until it slides completely into place.
Pull down VERY GENTLY on shade to make sure
that shade is secure.
Please proceed to Section 13 on page 12 to
complete installation.
*For
Model OS119
, follow instructions on this page.
motor
housing
switch housing
plate
shade
switch
housing
nodules
slots
fan pull chain
light pull
chain
