8. Canopy Assembly.
Lift canopy until it covers hanging bracket and
touches ceiling. Tighten canopy set screw to
secure canopy.
page 6
set screw
canopy
black
black
AC IN
black
black
(AC TO FAN)
wall
control
back plate
screw
black
black
AC IN
black
black
AC TO
FAN
*
Remove existing wall switch. Remove
screw at the bottom of the wall control.
Then, remove back plate from wall
control by pulling out gently from the
bottom.
Connect
BLACK
(
TO MOTOR L)
wire from
wall control to
BLACK
(
AC TO FAN
)
wire
from wall.
Connect
BLACK
(
AC IN L
)
wire from
wall
control to
BLACK
(
AC IN
) wire from wall.
Use wire connectors provided when
making connections.
* Wrap each wire connector separately
with electrical tape as an extra safety
measure. Gently push spliced/taped wires
and wire connectors into outlet box.
Align slots at top of wall control with tabs
on backplate. Push bottom of wall control
until flush against the wall. Re-insert
screw that was previously removed to
secure wall control.
7. Wiring - Wall Control
outlet
box
back
plate
slot
black
black
AC IN L
black
black
TO
MOTOR L
tab
