page 8
9. Blade Assembly.
Time Saver
: Washers for blade screws can be
set on each blade screw prior to installing
blades.
Locate 15 blade attachment screws and
washers in hardware pack. Slide blade through
one of the narrow, rectangular openings on
motor housing, aligning holes in blade with
holes in blade arm (
located on the underside
of the motor housing
)--
refer to drawing at
right
. Insert 3 blade attachment screws (along
with washers) with fingers first and then
tighten screws securely with a Phillips
screwdriver. Repeat procedure for each
remaining blade.
Note
: Tighten blade attachment screws twice
a year.
blade
motor housing
blade attachment
screws and washers
blade
arm
