CR Remeha iSense, User Manual, Page: 14 / 124

14
EN
The degree of increase is determined using the “ RT effect ” function.
• RT effect : factor influencing the shift in the heating curve.
•
Heat limit day
: outside temperature above which the central heating is switched off during the
day. The day temperature limit is relevant when the desired room temperature is higher than the
night temperature that has been set via Menu > Program > Night temp.
• Heat limit night : outside temperature above which the central heating is switched off during the
night. The night temperature limit is relevant when the desired room temperature is the same as
or lower than the night temperature that has been set via Menu > Program > Night temp. .
Heating curve – an example
R000250-04-A
-5 -15 5 15 25
Outside temperature (°C)
Boiler temperature (°C)
100
90
80
70
60
50
40
30
20
10
0
0
Base point
Desired room temperature
of 15°C during the night
Increased room temperature
during the day
Desired room temperature
of 20°C during the day
Climate point