CPN MC-1 Elite Operating Manual Download Page 80 | Manualshive

Page: 80 / 116

CPN MC-1 Elite Operating Manual Download Page 80

InstroTek

76

required. It is best to supply additional copies if more than one
carrier is involved in the routing. A sample is in the Appendix.

The  source  activity  must  be  stated  in  units  of  Bq  on  the  DG
document.

The size of the package in mm or meters must be stated on the
DG document. The DG document must cite the number of and
Certificate of Competent Authority that was obtained from the
appropriate  government  agency  prior  to  the  first  export
shipment  of  the  type  of  sources  in  the  gauge.  In  the  USA  it  is
obtained  from  the  DOT.  This  document  will  generally  be
supplied  by  the  gauge  manufacturer,  which  obtained  them
from the source manufacture. These documents expire. Current
copies  should  be  obtained  as  appropriate.  Some  carriers
require that copies of the cited Certificated be attached to the
DG document. Certificates of Competent Authority on file may
be used to satisfy the Special Form certification required to be
on file for at least one year after the latest shipment.

Label:

The  source  activity  must  be  stated  in  units  of  Bq  on  the
RADIOACTIVE YELLOW-II labels.

A  CARGO  AIRCRAFT  ONLY  Label  must  be  installed  within  6"  of
each of the two RADIOACTIVE YELLOW-II labels.

«
...
78
79
80
81
82
...
»

Summary of Contents for MC-1 Elite





















































































































Reviews:

No comments