CPI VZU-6994, Manual

Page: 2 / 25

SPECIFICATIONS, VZU-6994
Electrical
Frequency 13.75 to 14.50 GHz, 12.75 to 14.50 GHz,
or 14.7 to 15.2 GHz
Output Power
TWT 350W min. (55.44 dBm), all confi gurations;
400W min. (56.02 dBm), 13.75 to 14.5 GHz
Flange 275W min. (54.39 dBm), all confi gurations;
340W min. (55.31 dBm), 13.75 to 14.5 GHz
Bandwidth 500 to 1750 MHz, depending on confi guration
Gain 73 dB min. at rated power output;
78 dB min. at small signal
RF Level Adjust Range 0 to 20 dB
Gain Stability ±0.25 dB/24hr max.
(at constant drive and temp.)
Small Signal Gain Slope ±0.015 dB/MHz max., 13.75 - 14.5 GHz
±0.02 dB/MHz max., all other confi gurations
Small Signal Gain Variation 1.0 dB pk-pk across any 80 MHz band;
2.5 dB pk-pk across the entire passband
Input VSWR 1.3:1 max.
Output VSWR 1.3:1 max.
Load VSWR 2.0:1 max. operational; any value for operation
without damage
Residual AM -50 dBc below 10 kHz
-20[1.3 +log F(kHz)] dBc, 10 kHz to 500 kHz
-85 dBc above 500 kHz
Phase Noise
IESS Phase Noise Profi le -6 dBc
AC Fundamental -42 dBc
Sum of All Spurs -47 dBc
AM/PM Conversion 2°/dB max. for a single carrier at
8 dB below rated power for 350W 13.75
to 14.5 GHz; 2.5°/dB max. at 8 dB below
rated power for all other confi gurations
Harmonic Output -60 dBc at rated power, second and third
harmonics
Noise Density <-150 dBW/4 kHz in Receive/Reject Band
<-65 dBW/4 kHz in Passband
<-60 dBW/4 kHz in Passband w/linearizer
Intermodulation -24 dBc max. with two equal carriers
at total output power 7 dB (4 dB with
optional integral linearizer) below rated
single-carrier output; -22 dBc max. at 7 dB
OBO (4 dB w/lin.) for 14.7 - 15.2 GHz confi g.
Group Delay 0.01 ns/MHz linear max.
(in any 80 MHz band) 0.001 ns/MHz
2
parabolic max.
0.5 ns pk-pk ripple max.
Environmental (Operating)
Primary Power 110 - 240 VAC ±10%,
single phase 47-63 Hz
(100 VAC optional)
Power Consumption 1.3 kVA typ., 1.4 kVA, max. for
350W confi gurations;
1.35 kVA typ., 1.5 kVA max. for
400W confi guration
Power Factor 0.95 min.
Ambient Temperature -10° to +50°C operating
-40° to +70°C non-operating
Relative Humidity 95% non-condensing
Altitude 10,000 ft. with standard adiabatic
derating of 2°C/1000 ft., operating;
40,000 ft., non-operating
Shock and Vibration Designed for normal transportation
environment per Section 514.4
MIL-STD-810E. Designed to
withstand 20G at 11 ms (1/2
sine pulse) in non-operating
confi guration.
Acoustic Noise 65 dBA @ 3 ft. from amplifi er
Mechanical
Cooling (TWT) Forced air with integral blower
Rear air intake & exhaust
RF Input Connection Type N female
RF Output Connection WR 75 waveguide fl ange,
grooved with UNC 2B 6-32
threaded holes
RF Output Monitor Type N female
Dimensions (W x H x D) 19 x 5.25 x 24 in.
(483 x 133 x 610 mm)
Weight 60 lbs (27.3 kg) max.
O P T I O N S :
• Remote Control Panel
• Integral Linearizer
• Redundant and Power
Combined
Subsystems
• External Receive Band
Reject Filter (Increases
loss - consult factory
for
details)
K u - B a n d
For more detailed information, please refer to the corresponding CPI Technical Description.
Note : Specifi cations may change without notice as a result of additional data or product refi nement.
Please contact CPI before using this information for system design.
MKT 15, ISSUE 15 11/06 PDF
Certificate Number: 30515
KEEPING YOU ON THE AIR
not up in the air