![background image](http://html1.mh-extra.com/html/cpi/euromix-silo/euromix-silo_operating-instructions-manual_2675015008.webp)
The silo requires a 3/4" water supply with a minimum flow
capacity of 900litres per hour at 2 BAR pressure. Some sites
may require a break tank to comply with local water Bylaws and
this can be supplied by CPI EuroMix on request.
The water supply can be provided by a water tank if there is
no mains supply to the site. The tank outlet must be placed a
minimum of 500mm above ground level, within 5mtrs of the silo
and equipped with a 3/4" outlet. An inline filter must be included
prior to the silo connection.
All CPI EuroMix silo equipment will be inspected and tested
prior to the commencement of the hire. A certificate showing
the results of the test will be issued for each piece of equipment.
It is the customer’s responsibility to ensure the equipment
is safe to use whilst on site and to ensure compliance
with the Use of Electricity at Work Regulations.
CPI will carry out subsequent tests on request. There is a
charge for this service.
CORRECT CONNECTION OF WATER SUPPLY
ELECTRICAL INSPECTION AND TESTING
SILO SETUP
8
!
!
WATER PANEL
MAINS SUPPLY
WATER IN
MIXER
ELECTRICAL PANEL
!
MAINS SUPPLY
WATER IN
MIXER
SPLIT PANEL
STANDARD PANEL