![background image](http://html1.mh-extra.com/html/cpi/euromix-silo/euromix-silo_operating-instructions-manual_2675015007.webp)
This switch must always be in the down position. If the
switch is in the up position, water will pass through the
panel and mixer and the ‘start’ and ‘stop’ buttons will not
function.
Note
Not all control panels will contain this switch.
There are multiple sockets on the panel – for the mixer
motor, vibrator and mains inlet. It is important that these
are all correctly connected. All cables should be visually
inspected before any connection is made.
Refer to the diagrams on pages 4 and 5 for a simple guide.
TOGGLE SWITCH
CONNECTING MOTOR AND MAINS SUPPLY CABLE
7
!
!
Mixer Motor
Vibrator
Mains Inlet