![background image](http://html1.mh-extra.com/html/cpi/cxb2/cxb2_installation-manual_2675005008.webp)
CXB2
Mexico
8
©
CPI 2016
P/N# 253052002
http://www.cranepi.com
NOTE CASSETTE DECAL
Figure 7
|
CX Bill Validator
Crane Payment Innovations
www.cranepi.com
A. To remove the cashbox:
1.
Lift the black latch up and hold.
2.
Pull Cashbox backwards, removing box tabs from slots.
B. To download firmware from a Flash Drive:
1.
Insert prepared Flash Drive with Micro USB OTG Adapter to
Micro USB OTG connector.
2.
Push service button (less than 1 sec).
3.
Wait until blue Diagnostic LED stops flashing.
4.
Disconnect Flash Drive.
C.
To retrieve diagnostic:
There are two ways to retrieve diagnostic
information.
1. Diagnostic LED: Observe blue Diagnostic LED. It will flash to
indicate the problem per the diagnostic table below.
2. Bezel LEDS: When the Bezel LEDS are solid red, insert a bill
in the entry slot. The Bezel LEDs will indicate the problem as
per the diagnostic table below.
# of Flashes
Diagnostic Description
1
Cash box is removed
3
Cash box is full
4
Check stacker/cash box
6
Clean sensors
7-9
Unit Failure, call for service
11
Clean note pathway, Sensor
assembly not seated
1 or 2 blue, on red Call for service or download valid
software
Any other combination of flashes, please
consult the operation manual or call technical support.
For technical support:
www.cranepi.com/en/support/