CXB2
Mexico
4
©
CPI 2016
P/N# 253052002
http://www.cranepi.com
INSTALLATION INSTRUCTIONS
(CONTINUED)
3.
Install the CXB2 onto the note validator mounting studs and through the mounting hole of the
machine. Secure using the appropriate hardware.
See Figure 3.
Figure 3
4
.
Connect the CXB2 to the supplied interface harness. Install the (16) pin connector into the interface
slot.
See Figure 4.
Caution
: Do not force the plug into note validator. This may cause pins to bend or break.
MDB Harness: OPT-HS-CXB-MDB2 Rev.D
Figure 4
CXB2
Service Button
Diagnostic LED
1
2
Hex Nut #8-32
(4 pcs.)
(not included)
Lower Sensors
Module Latch
(2 pcs.)
Cassette Latch
Micro USB
Connection
To remove the cassette:
1. Lift the latch.
2. Lift up on the
cassette. Pull back.
