1
Countertop Range
Installation & Operation Instructions
Model: HP212, HP424, HP636
IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain this manual for the life of the equipment. For Warranty
Service and/or parts, this information is required.
Model Number Serial Number Date Purchased
WARNING:
For your safety, do not store or use gasoline or other flammable vapors or
liquids in the vicinity of this or any other appliances. Keep the area free and clear of
combustible. (See ANSI Z83. 14B, 1991).
WARNING
：
Improper installation, adjustment, alteration, service or maintenance can
cause property damage, injury, or death. Read the installation, operating and
maintenance instructions thoroughly before installing, or servicing this equipment.
WARNING
：
Instructions must be posted in a prominent location. All safety precautions
must be taken in the event the user smells gas. Safety information can be obtained from
your local gas supplier.
CAUTION:
These models are designed, built, and sold for commercial use only. If these
models are positioned so the general public can use the equipment, make sure that
cautions, warnings, and operating instructions are clearly posted near each unit so that
anyone using the equipment will use it correctly and not injure themselves or harm the
equipment.
GAS PRESSURE
The appliance and it’s individual shutoff valve (to be supplied by user) must be disconnected from
the gas supply piping system during any pressure testing of that system at test pressures in excess of
½ psi (3.45 kPa).
The appliance must be isolated from the gas supply piping system by closing it’s individual manual
shut-off valve during any pressure testing of the gas supply piping system at test pressures equal to
or less than ½ psi (3.45 kPa).
WARNING
：
A factory authorized agent should handle all maintenance and repair. Before
doing any maintenance or repair, contact your authorized service representative.
Conforms to ANSI STD
Z83.11b-2009(R2012)
Certified to CSA
STD 1.8b-2009(R2012)
Summary of Contents for HP212
Page 8: ...8 EXPLOSION VIEW DRAWING MODEL HP424...
Page 11: ......
