on the two sides (2pcs of side)
C
：取下上小腿，然后拉开皮套的拉链，即可
将上小腿外套取下
Take away the upper leg rest
，
open the zipper on the coat
，
disconnect them
Lower part
A
：旋转小腿行走皮带轮使小腿伸长到最大，
取下小腿底部的两个脚垫
Turn on the belt of motor to set axletree is longest
And take away the two feet pads
B
：旋转小腿脚轮的侧盖，将侧盖取下，然后
用内六角螺丝刀取下固定小腿脚轮的螺栓，
将脚轮取下
Turn on the side board of wheel, use tools slacken and
remove fixing the pin, then take it off
C
：拉开下小腿底部的拉链，将下面的皮套取下，再将固定
PE
板的
6pcs
十字盘头螺钉取下，
取下
PE
板后
,
可以看到两个固定下小腿的法兰螺母，也取下它们
.
Open the zipper on the bottom and remove fixing the screws on the PE board
After take away the PE board, you can see 2 nuts on the rest that slacken and remove them
脚垫（
2pcs
）座
Feet pads
脚轮被取下
Take away the wheel
脚轮侧盖被取下座
After take away the side board
固定
PE
板的十字盘头螺钉
(6pcs)
Slacken and remove fixing the screws
法兰螺母（
2 pcs
）
Slacken and remove fixing the nuts
