B.
使小车从齿轨中走出来，有两种方法：
①给行走电机加
24V
直流电压，此方法省力省时
②用冶具（例“—”螺丝刀）
，来旋转电机机轴，比较麻烦；见下图
Remove rolling car take from rack rail have 2 ways
①
Fist way is better than
②
, Just give rolling motor to 24V
②
Use tools turn around axletree to revolve until the rolling car take from backrest
(See image below)
C
：拆下行走电机。
Disassembly the rolling motor
9
．披风的拆卸
Disassembly of the backrest pad
A
：拉开连接披风与坐垫的拉链
Unzip the zipper between the seat rest and the backrest pad
。
B
：顺着披风往下，找到并断开
3
个气管接头和披风腰部加热丝的接线头，取下披风。
Find the terminals of the 3 air hose and the terminal of the heater wire follow the backrest
pad
，
then disconnect them
，
take the pad down.
The 3 air hoses of the
backrest pad
The backrest pad
The terminal of the
heater wire
披风与坐垫的拉链
The zipper
用 冶 具 旋 转 此 轴 就
可使小四行走（注意
行走方向）
