CozyCab A-11241, Mounting Instructions, Page: 6 / 29

June 2005
05-10386
ELECTRICAL MOUNTING
3.1) Disconnect battery.
3.2) The cab is supplied from the factory, pre-wired. Locate the 12 Gauge red wire that runs
down the right rear cab frame tube.
3.3) With the engine hood opened, route the wire to the right inside area of the engine
compartment.
3.4) Locate the wire assembly harness –3 (Refer to Item 14 on mount kit drawing 4-14563).
3.5) Remove two nuts that secure two relays located on the right side of the engine compartment
(See Figure 3-5).
Figure 3-5
3.6) Install the wire assembly harness –3 (See Figure 3-6).
3.7) Re-install the two secure nuts attaching one black wire from the wire assembly.
Figure 3-6
SECURE NUTS
ON FARSIDE
WIRE ASSEMBLY
HARNESS -3
BLACK WIRE
(GROUND)
SECURE NUTS
Page 6 of 29