CozyCab A-11241, Mounting Instructions, Page: 11 / 29

ADDENDUM_05-10386a
INSTALLATION ADDENDUM
John Deere 1400-1500 Series 2
Heater Hook-Up Kit 8-14856
DATE: 8-23-04
FOR COZY CAB A-11241 and JOHN DEERE 1400-1500 Front mount tractors, SERIES 2 MODELS
Manufacturers have been known to change engines, water pumps, alternators and other components to
improve performance of their product at anytime. In the case of John Deere’s 1400-1500 Series 2 models,
the water pump changed and an alternator bracket now makes it difficult to install the proper fittings for the
Cozy Cab heater hookup.
Installation Steps (See Figure A);
1. The engine coolant should be drained, if not done so already.
2. Thread the metric jam nut onto the aluminum fitting.
3. Place brass washer against the jam nut.
4. Remove the threaded seal plug on the thermostat engine area near the alternator bracket, opposite the
side from the temperature sensor.
5. Install the aluminum fitting with the jam nut and washer and position the fitting so that the brass fitting
can be installed easily. Tighten the aluminum fitting by backing the jam nut against the brass washer.
6. Install the brass fitting with pipe thread seal tape into the aluminum fitting.
7. Connect the heater hose and hose clamp supplied with the cab’s heater kit, to the brass fitting.
The lower return line hookup that connects to the lower radiator hose remains unchanged. Refer to cab
mounting instruction manual 05-10386, if not connected.
Any you have questions or comments, feel free to contact us at:
BOX 70 • LITCHFIELD, MINNESOTA 55355-0070 (320) 693-3221 Fax: (320) 693-7252 1-800-222-5463
Web-site address: www.800cabline.com
Figure A
ALUMINUM
FITTING
BRASS
WASHER
METRIC
NUT
BRASS
FITTING
Page 11 of 29