
June 2005
05-10386
SAFETY INSTRUCTIONS
Read operator’s manual. Be thoroughly familiar with the controls, capabilities,
and proper use of the equipment.
NEVER ALLOW ANY RIDERS.
IMPORTANT:
This cab must only be used on units outfitted with a FOLDING
ROPS (Roll Bar).
DO NOT
place this cab on a unit with a non-folding ROPS.
DO NOT
remove the top half of the folding ROPS to accommodate this cab.
DO NOT
weld, cut, drill, modify or remove the ROPS in any manner unless
instructed by manufacturer.
Thoroughly inspect cab mounting periodically.
Stay alert for hidden hazards and traffic.
Avoid sudden starts, excessive speeds, and sudden stops when operating on
hillside, rough ground and most off-the-road operations.
Use extreme care when working close to fences, ditches, or on hillsides.
Wait for tractor to
STOP
before dismounting.
Check clearance carefully before driving under any objects.
Avoid operating sideways on a steep slope whenever possible.
ALWAYS
buckle safety belt while operating tractor.
Never exceed factory recommended specifications.
Page 2 of 29
Summary of Contents for A-11241
