1019068-C
Page 23
INSTALLATION
W
ALL
W
ALL
Left
Side of
Heater
W
ALL
W
ALL
Right
Side of
Heater
10”
STEP 15.
Check the inside of the housing for safety labels.
Try to avoid drilling through any pertinent safety
information during this step.
1. PLEASE NOTE
A
OF THIS STEP.
Align the PilotPro very close to the back edge of the housing.
2. PLEASE NOTE
B
OF THIS STEP.
Be sure to face the notch / cutout of the base of the
PilotPro / Mounting plate (
51) toward the wall.
A
B
Use the base of the
PilotPro as a template
for the following steps.
Mount as directed or the
wire harness will not reach.
3.
Using the Mounting Plate (
51
) as a template, align
in place as illustrated.
Using a marker or pencil,
leave a mark for the three hole locations on the
metal housing.
4.
SET ASIDE THE MOUNTING PLATE (51).
DO
NOT
DRILL DIRECTLY THROUGH MOUNTING PLATE.
DRILL MAY CRACK THE MOUNTING PLATE.
5.
Drill the three holes into housing
using a 3/16” drill bit.