Position the child car seat inside the
vehicle rear seat and place the child in the
child car seat.
Fasten with the vehicle 3-Point passenger
seat belt by first looping the diagonal belt
inside the red belt holder located on the
lower part of the headrest.
Make sure that the belt is fully looped
inside
this hole and that the belt is not
twisted in any way.
While holding the buckle, pull the diagonal
belt over the shoulder of your child, and
thread this
under
the armrest of the buckle
side. Then thread the lap belt
under
both
armrests.
Fasten the seat belt until you hear an
audible “CLICK”. Pull the belts tight.
To Secure Child (Group 2)
DO NOT twist the seat belt in
any way and remove any
slack in the harness.
15
Group 2
Infiniti 1/2/3