Loop the metal retainer from the crotch
strap through the band on the cushion flap
and insert with the short side into the holes
on the support seat cushion and seat
cover, then into the slot of the seat all the
way through the bottom. Turn the metal
retainer in place to lock in position.
Lift the sides of the support seat cushion
and insert the other two metal retainers
attached to the hip straps into the holes of
the seat cover and the slots on the seat all
the way through the bottom. Turn the metal
retainers in place to lock in position.
Open the protective flap at the back of
seat.
Insert both harness straps with its Velcro
fasteners to the holes on the support
backrest cushion and through the correct
belt slots on the backrest. Make sure that
both straps are inserted in the same level.
Check that all the three metal
retainers are LOCKED in
position by pulling the hip
straps and the vertical strap of
the harness.
22
Infiniti 1/2/3
