While holding the buckle, tuck in the
diagonal belt to the red belt guide
attached on the other side and thread the
lap belt
UNDER
the armrest from the
same side. Then, fasten the seat belt until
you hear an audible “CLICK” .
Push the car seat back against the vehicle
backrest and simultaneously pull the
diagonal belt upwards to tighten .
Remove any slack in the seat belt.
Check that the child car seat is correctly installed :
The diagonal belt MUST NOT be inserted through the red belt
holder on the headrest. The red belt holder is DESIGNED to
be used during the next stage – Group 2. For Group 1, it
should be passing under the red belt holder and positioned in
the gap between the headrest and the wing of backrest.
The child car seat is securely fastened.
The vehicle seat belt is tightened up and not twisted.
The diagonal seat belt runs
between
the headrest and the wing on
one side and threaded in the
red belt guide
on the buckle side.
The lap belt runs
UNDER
the armrest of both sides.
10
Group 1
Infiniti 1/2/3
5
5
6
7
8
8
7
6
