Real-time Monitoring
Page 39
CXX-UM-03060-EN-01
April 2019
Real-Time Report Display
To view the parameters in real-time, a flow processor must have established
communication with the PC and be communicating properly
Once connected, click the
Connect
button below the
Status
window
OTEE:
N
See
for all the variables for monitoring
In addition to viewing all real time variables, you can also access the
following features:
The
Show Graph
button switches the logging information section to a small graph
of the currently selected table To select another table, click somewhere in that
table’s data
Use the IFC GUI data logging feature to create a log of selected data measured
over a period of time The GUI sends information to a tab-delimited file The
software measures the information either for a pre-programmed or manually
selected amount of time
Figure 36: Log File field
To configure the IFC GUI to provide log reports:
1 Type or browse to a location on your computer to output data logging
This designates the file name and location in which you wish to store
the information
2 Type a numeric value in the
Sample Rate
field to specify how often a new entry
should be placed in the data log
3 Select either seconds (
S
) or milliseconds (
mS
)
4 Select the interval stop from the drop-down menu, by clicking the drop-down
menu, then clicking an option to select it
