Hardware Configuration
April 2019
CXX-UM-03060-EN-01
Page 36
HARDWARE CONFIGURATION
Model Information
The model information is on the left side of the interface It shows information
pertaining to the profile currently loaded (For example, if you upload a profile
from the flow processor, the hardware information is for that flow processor)
The model information is input at the factory and offers our technicians the base
information needed for troubleshooting or profile tracking
Do not change these
factory settings
Figure 31: Model information
Field
Function
IFC Model
Identifies the configuration of EC80 Flow Processor for which the profile
was designed
IFC SN
Provides traceability of an individual EC80 Flow Processor and
associated documentation
Meter Model No
Identifies the configuration and features of the flow meter
Meter SN
Provides traceability and calibration information for the flow meter
Firmware Revision States the flow processors firmware configuration and provides historical
revision control
General Hardware Information
The general hardware information is on the left side side of the interface just
below the model information It contains factory configuration information
regarding the
Clock Frequency
,
Carrier
Frequency
,
Input and Output Average,
and
Low Flow Cutoff
(in gpm)
Figure 32: General hardware information
