background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 62857 

        

Table of Contents

Safety ......................................................... 2
Specifications ............................................. 4
Assembly .................................................... 4

Maintenance ............................................... 6
Parts List..................................................... 7
Warranty ..................................................... 8

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential personal injury hazards.  

Obey all safety messages that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

WARNING marking concerning Risk 

of Eye Injury.  Wear ANSI-approved 

safety goggles with side shields.

Read the manual before 

set-up and/or use.

WARNING marking concerning 

Risk of Head Injury.  Wear hard hat 

during assembly and service.
WARNING marking concerning Risk 

of Hand Injury.  Wear heavy-duty work 

gloves during assembly and service.

Summary of Contents for 62857









Reviews: