COVANA C-HOR, Instruction Manual

Page: 27 / 60

INSTALLATION MANUAL INSTALLATION 27
Figure 53
10) Slide on one of the 93 7/16in. (237 cm) C-
channel previously assembled with the corner
brackets on the end of the front panel. (Figure
53)
11) Screw in the phillips #10-24 x 1/2in. screws in the
pre-drilled holes of the C-channel through the
corner brackets holes. (two on each side of the
cover) (Figure 54)
12) Repeat steps 10 and 11 for the rear side of the
cover. (Figure 55 and Figure 56)
WARNING

Do not to overtighten screws. Power tools
must not be used. The bolts will break or strip
under excessive torque.

You might need the help of someone else to
squeeze the cover to reach the predrilled
holes.
Figure 55
Figure 56
Figure 54
Corner
bracket
10-24x1/2in. thread
cutting screws