STOP
DO NOT RETURN TO THE STORE!
PAGE 5 OF 8
Fire Shield
As Illustrated:
Remove the glass from the three
holes on the fire shield as
illustrated. These holes must be
exposed completely to ensure that
there is adequate airflow after ignition.
FIGURE 6
FIGURE 7
Rotate
Clockwise
Caution: The Tank
must face this way.
FIGURE 8
Step 8:
Place the glass (#14) into the steel cover.
See Figure 8.
FIGURE 9
5
4
Plastic
Screw
Step 6:
Open the front door (#5) and place the tank into the
bottom frame (#4). Secure in place by using the plastic
screw. See Figure 6.
Note:
Secure the tank in place by turning the plastic screw
clockwise as illustrated above.
Step 7:
Attach the fuel supply hose (#6) to the tank by rotating
clockwise to its connector. See Figure 7.
6
9
Step 9:
Place the cover (#9) onto the table top (#6) to cover
the glass set. See Figure 9.
Note:
In order to protect the burner system, when the fire
is not in use and on rainy days, the cover should be
used.
Note:
The glass cannot be
exposed over top of the
steel cover surface.
14
V-3
