DOOR GASKET REPLACEMENT
Remove the doors from the unit. Place the doors, face down on a protective surface to ensure no
marring or scratching occurs during gasket replacement. To replace the Thermoglass
™
knitted rope
and tape gasket, first remove all of the old material and gasket cement. Use a putty knife or other
sharp instrument to assist in removal. Use caution to prevent injury when removing old material. It
is important to ensure the area is totally clean before installing the new gasket cement and material.
The gasket must fit tight against the doorframe in order to ensure a proper airtight seal when the stove
is being operated. Apply gasket cement to the gasket channel per instructions provided with the
gasket kit. Once the cement has been properly applied, install the new gasket. Both gasket and
gasket cement are available from your authorized Country Flame dealer. The following table defines
the gasket material used in the Inglenook Fireplace:
Gasket
Length
Quantity
Dimensions
Around glass
4.25 feet each
2
¾” wide by 1/16” thick tape
Doorframe
5
feet
each
2
3/8” rope, high density
Version: 7.0
20
Ash drawer
30 inches
1
½” wide by 1/8” thick tape
Summary of Contents for Inglenook IWZC-02
