Installation in the car
Routing the vehicle belt (universal)
Pull out the vehicle seat belt and guide it in the front of your child to the vehicle seat
buckle. Engage the buckle tongue in the vehicle seat buckle. CLICK! (14)
Divide the lap belt section and the diagonal belt section on the side of the vehicle
buckle. The lap belt section shall be placed under the armrest into the red belt guide
of the seat cushion. The diagonal belt section shall be placed above the armrest. (15)
Insert the lap belt section on the other side of the seat cushion into the light red belt
guide as well.
Caution!
The lap belt section must lie as low possible over your child’s hips.
Guide the diagonal belt section into the red holder of the headrest until it slides
behind the safety hook. (16)
! Make sure the belt is not twisted.
! The lap belt should be worn over the hips.
(17, 18)
Adjusting the height of the headrest
Grasp the adjustment handle by the back of the headrest and pull it up wards slightly.
The headrest is now released. (19)
You can now adjust the released headrest to the desired height. As soon as you have
let go of the adjustment handle, the headrest will engage. (20)
Using the storage box
Pull the storage box out from the booster base to use. (21)
Push the storage box into the booster base to store. (22)
! DO NOT use with hot liquids.
! DO NOT step on or put excess weight in the storage box.
GB
INSTRUCTION MANUAL
13
RUMBA PRO
Summary of Contents for RUMBA PRO
Page 2: ......
Page 4: ...1 2 3 6 7 8 4 5 ...
Page 5: ...Click Click 9 10 11 12 13 14 17 18 15 16 ...
