Coto baby RUMBA PRO, Instruction Manual

Page: 18 / 40

EVERY JOURNEY WILL BE ADVENTURE
RUMBA PRO
12
4.1 Headrest adjusting button
4.2 Shoulder belt guide
4.3 Lap belt guide
4.4 Fit connector-block
5.1 Fit release button
5.2 Stability fit connectors
Preparing to install
Crucial parts of your baby car seat:
3.1 Headrest
3.2 Flank
3.3 Armrest
3.4 Storage box
3.5 Unlock stability fit
Preparing connectors
Pull to unlock (6), and simultaneously pull and release the connector block (7)
Rotate the connectors into position. (8)
Installation in the car
Routing the vehicle ISOFIT (semi-universal)
For the Stability fix model lock on the two stability fix connectors to the anchorages
in your car seat. Make sure you hear a clear sound “click”(2x) and see the appearance
of green mark. (9)
Place the shoulder belt through the shoulder belt guide, and the lap belt through
the under of armrest. Caution! The lap belt section must lie as low possible over
your child’s hips. Guide the diagonal belt section into the red holder of the headrest
until it slides behind the safety hook. (10)
! An unoccupied BS05-T should still be fastened with the 3-point-belt.
! Make sure luggage or other objects are properly secured.
Place the child in the seat.Lock the belt in the buckle until you heard a clear sound
“click”. (11)
! Make sure the belt is not twisted.
! The lap belt should be worn over the hips. (12, 13)
GB
RUMBA PRO