10
EN
GL
IS
H
Edging wheel
The grass trimmer comes with an edging
wheel (2). It consists of two parts which click
together to surround the trimmer head.
It is used for trimming edges.
Operating instructions
Setup
1. Adjust the length of the telescopic shaft
(6) to suit your height. Twist the locking
knob (7) clockwise to release the shaft,
adjust the length and then twist
the locking knob anticlockwise to
tighten.
2. Adjust the angle of the trimmer head
by holding in the button (4) and moving
the head to one of the 5 settings.
Release the button when the trimmer
head is at the desired setting.
3. The trimmer head can be rotated
and set to one of 3 fixed settings.
Slide the spring-loaded catch (5)
forward towards the trimmer head, twist
the trimmer head into one of its fixed
settings and then release the catch.
