2.
The
pe
dals are marked “L
”
(left) or “R
”
(right). Insert the fixing screw of the right
peda
l into
the crank on the right side of the
p
roduct and fix it with the
spa
nner. Then, screw the nut
into the fixing screw on the other side of the crank. Proceed the same way to fix the left
pe
dal to the crank on the left side of th
e p
roduct.
3.
Fix the handlebar to its s
upp
ort with the Allen screws and washers.
4.
Place the handle cover onto the handle. Please
p
ress the handle cover gently lo lock it into
pl
ace.
5.
Use the locking bolt to adjust the height of the handlebar as shown in t
he pictu
re.
6.
1 . Slide the monitor onto the grooves you can find on its s
upp
ort.
2 . Connect the cables to the sockets “sensor
”
and
“pul
se
”
3 . K
eep
all the cables inside the corrugated
pipe
.
7.
Pull from the seat-adjusting knob to adjust the height of the seat. Insert the knob again to
fix the seat in the desir
ed p
osition.
8.
Rotate the brake knob clockwise to increase the resistance and counterclockwise to
decrease the resistance. Press down the brake knob for an emergency sto
p
.
9.
Fasten the screws on to
p
of the
front spring to block the
swinging function. Loosen the
screws to activate the swinging function.
10
.
Insert the Allen key in the o
p
ening of the tube to fasten the screw until it touches the
domed nut. Fasten the screw with the wing nut.
4. OPERATION
MONITOR OPERATION
T
ime...............................................................................................00-00
—99:59 (Minute: Second)
Spee
d .........................................................................................................................
00
—99.9 km/h
Distance.......................................................................................................................
0.00
—99.99 km
06
07