Concrete, Brick or Block
Tools: 0.48 cm x 4.45 cm. Washer Head Concrete Screw Anchors, drill bit &
drill (Package Not Included)
1. Fix a single panel at the top of the wall or
surface. Use your drill and drill bit to drill a hole
in the top left & right square holes on the backing
grid of the panel. Each hole needs to be drilled
approximately 0.64 cm deeper than the anchor
screw being used.
2. Screw a washer head concrete anchor in each
hole to securing the panel on the surface.
3. Repeat processing downward until a single
column is completed, please ensure that the panels
are securely fastened as you progress.
4. Repeat steps 1-3 until your installation is complete.
Metal l Aluminum
Tools: 1.9 cm Truss Head Self-Tapping Screws & drill (Package Not
Included)
1. Fix a single panel at the top of the wall or
surface. Use your drill and 1.9 cm self-tapping
screws to place a screw in the top left & right
square holes on the backing grid of the panel.
2. Repeat processing downward until a single
column is completed, please ensure that the panels
are securely fastened as you progress.
3. Repeat steps 1 & 2 until your installation is
complete.
Screw in Corners
Screw in Corners
Assembly(No tools required)
1.Observe the direction of the foliage
- Boxwood &Fem: Multi directional
- Ivy & Lavender: Follow direction of foliage
2. Connect panels together using the easy
snap-to-lock system.
Chain Link, Wire Mesh & Wrought Iron
Tools: Green zip ties (Package Not Included)
1. Fasten the first panel or connected set of panels directly to the support.
2. Repeat progressing laterally (clip panel sections together before fastening
to the support fora perfect fit.)
Drywall and Wood
Tools: 1.27 cm x 1.27 cm Crown 20 Gouge Staples
& Stapler (Package Not Included)
1. Fasten the first panel or connected set of panels
directly to the top of the wall or surface.
Use additional staples on the top panel in each
column hung.
2. Place 2 Staples on the edges of each panel .
3. Repeat progressing laterally (lip panel sections
together before fastening to the support for a
perfect fit.)
Snap-to-Lock
Direct to Support
Staple to Edges
EN
02
03
