10
(1)Check periodically whether the inner circuit connection is in good
condition (esp. plugs). Tighten the loose connection. If there is oxidization,
remove it with sandpaper and then reconnect.
(2)Keep hands, hair and tools away from the moving parts such as the fan to
avoid personal injury or machine damage.
(3)Clean the dust periodically with dry and clean compressed air. If welding
environment with heavy smoke and pollution, the machine should be cleaned
daily. The pressure of compressed air should be at a proper level in order to
avoid the small parts inside the machine to be damaged.
(4)Avoid rain, water and vapor in filtering the machine. If there is, dry it and
check the insulation with equipment (including that between the connections
and that between the connection and the enclosure). Only when there are no
abnormal phenomena anymore, then the machine can be used.
(5)Check periodically whether the insulation covers of all cables are in good
condition. If there is any dilapidation, rewrap it or replace it.
(6)Put the machine into the original packing in a dry location if it is not to be
used for a long time.
7. MAINTENANCE
WARNING
The following operation requires sufficient professional knowledge of
electric aspect and comprehensive safety knowledge. Operators should be
holders of valid qualification certificates which can prove their skills and
knowledge. Make sure the input cable of the machine is cut off from the
electricity utility before uncovering the welding machine.
This marking indicates that this product should not be disposed with
other household wastes. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems.
They can take this product for environmental safe recycling.
Correct Disposal of this product
