manualshive.com logo in svg

Coster RTL 120, Manual, Page: 13 / 16

Share
Download
Coster RTL 120 Manual Download Page 13

13

D33351-RTL 120/520  Eng.

 

24.06.15 AM 

We reserve the right to make changes without notice

4.0.0

 

26.5  MENU NO. 4      "TEST" = TESTING 

Permission

 Page n. 

Display 

Description 

 

Memo

PRESS

 

 

THE FOLLOWING PAGE APPEARS:

IN.E1 

= the logical status of the first auxiliary input  (E1) is displayed.

OFF 

= Logical status Off 

ON 

= Logical status On 

WARNING: the logical status corresponds to the real position of the switch if it has been configured :
LOGICAL STATUS ON = SWITCH CLOSED.         If, on the other hand:
LOGICAL STATUS  ON = SWITCH OPEN  the indication is reversed    

 (pag. 17.0.3 Master)

 T  E  S  T

 I  N E  1        O F F

PRESS

 

 

THE FOLLOWING PAGE APPEARS:

IN.E2 

= The logical status of the first auxiliary input (E2) is displayed.

OFF 

= Logical status Off

ON 

= Logical status On 

WARNING: the logical status corresponds to the real position of the switch if it has been configured :
LIVE LOGICAL STATUS = SWITCH CLOSED.         If, on the other hand:
LIVE LOGICAL STATUS = SWITCH OPEN  the indication is reversed    

(page 17.0.7 Master)

 T  E  S  T

 I  N E  2        O F F

PRESS

 

 

THE FOLLOWING PAGE APPEARS:

 T  E  S  T

 I  N E  3        O F F

PRESS

 

 

THE FOLLOWING PAGE APPEARS:

O.1 

= The zone unit's relay output can be controlled 

NOTE: LEAVE AN INTERVAL OF AT LEAST 3 SECONDS BETWEEN 

 BUTTON 

DEPRESSIONS

 T  E  S  T

 O  1      O F F

4.0.1

4.0.2

IN.E3 

= The logical status of first auxiliary input (E3) is displayed.

OFF 

= Logical status Off

ON 

= Logical status On 

WARNING: the logical status corresponds to the real position of the switch if it has been configured:
LIVE LOGICAL STATUS = SWITCH CLOSED.         If, on the other hand :
LIVE LOGICAL STATUS = SWITCH OPEN  the indication is reversed    

(page 17.0.11 Master)

PRESS

 

 

THE FOLLOWING PAGE APPEARS:

CORR.tA 

= Correction of room temperature measurement

± X.X c 

= value of the correction 

Room Temperature measurement may be corrected on this page to align it with a 
measurement made using external devices.
As the sensor incorporated in the zone unit has a tolerance of ± 0.3 °C, the correction is scar-
cely meaningful: the function has been allowed for psychological reasons, so that the user may 
measure room temperature with a trusted device and set the unit accordingly.
This function is also of use when the installation site of the zone unit is open to thermal 
disturbances, as it allows compensation.

 C  O  n  F

 

C O R R t A  X X c

3.0.2

 

26.4  MENU NO. 4      "CONF" = READOUT OF TECHNICAL DATA 

    

 Page n. 

Display 

Description 

 

"TEST" MENU COMPLETED:
PRESS 

  TO RETURN TO THE START OF THIS MENU

PRESS 

 TO GO TO THE NEXT TECHNICAL MENU 

PRESS 

 TO GO TO THE PREVIOUS TECHNICAL MENU

PRESS

 

 

THE FOLLOWING PAGE APPEARS:

O 1 0 V o L t 

= The 0...10 Volt output may be adjusted in 1-volt steps pushing buttons 

 

NOTE: LEAVE AN INTERVAL OF AT LEAST 3 SECONDS BETWEEN 

 BUTTON 

DEPRESSIONS

 T  E  S  T

 O 1 0 V o L t   X X

"TEST" MENU COMPLETED:
PRESS 

  TO RETURN TO THE START OF THIS MENU

PRESS 

 TO GO TO THE NEXT TECHNICAL MENU 

PRES 

 TO GO TO THE PREVIOUS TECHNICAL MENU

PRESS 

 TO GO TO THE PREVIOUS TECHNICAL MENU

4.0.3

4.0.4

Summary of Contents for RTL 120

















Reviews:

No comments