12
D33351 - RTL 120/520 Eng.
24.06.15 AM
We reserve the right to make changes without notice
2.0.6
3.0.0
26.2 MENU NO. 2 "CHEC" = READOUT OF TECHNICAL DATA
Page n.
Display
Description
PRESS
THE FOLLOWING PAGE APPEARS:
d.T.V.R.
=Difference of Desired Remote Temperature (+ or –), set by site manager by means of the
MRL 608 C1 Master
± XX.X c
= Value of the difference
d T V R X X X c
PRESS
THE FOLLOWING PAGE APPEARS:
ZONE CL.
= Compensated Zone: the compensated part to which the zone belongs
A
= Compensated Part A
b
= Compensated Part B
This choice is made on page 20.0.26 of the MRL 608 C1 Master
Applies if season switching is: AUTOMATIC (COMPENSATED PART)
t E S t
Z O N E C L A
PRESS
THE FOLLOWING PAGE APPEARS:
S – W
= Indicates if the zone is operating in Summer or Winter mode
W
= Winter
S
= Summer
t E S t
S – W : W
"TEST" MENU COMPLETED:
PRESS
TO RETURN TO THE START OF THIS MENU
PRESS
TO GO TO THE NEXT TECHNICAL MENU
PRESS
TO GO TO THE PREVIOUS TECHNICAL MENU
t E S t
26.3 MENU NO. 3 "CONF" = LOCAL CONFIGURATION
Page n.
Display
Description
PRESS
THE FOLLOWING PAGE APPEARS:
ADD.
= Telematic address of the Bus P-Loc of the zone.
XXX
= Set desired address using
push-buttons.
PRESS
THE FOLLOWING PAGE APPEARS:
GRUP.
= The Group to which the zone belongs.
X
= Number of the Group
This number may be changed using the
push-buttons, locally as well as via the MRL 608 C1 Master.
C O n F
G R U P X
C O n F
A D D X X X
2.0.5
2.0.7
3.0.1
PRESS
THE FOLLOWING PAGE APPEARS:
APPA
= This page refers to the local device being used
RTLX20E
= the electronic unit of the Slave RTL 520 or RTL 120
XX
= Software version
These indications are the local unit's ID card.
t E S t
O 1 0 V o L t X X X
PRESS
THE FOLLOWING PAGE APPEARS:
A P P A
R T L X 2 0 E X X
O10VoLt
= 0...10 Volt modulating output
XX.X
= Actual value of output
2.0.8