7
5.
Slide the tank drawer out and place the LP tank in the drawer. Connect the regulator as shown in
Figure 5. Turn the black handle clock-wise to tighten. Turn the handle counter clock-wise to
remove. The hose must point down. Check that the valve is turned all the way clockwise to the
"OFF" position. Open the tank valve. Apply a solution of soapy water to the tank-regulator
connection and to the valve-hose connection to check for leaks. If soap bubbles continue to form,
the connection has a leak. If a leak is found, close the tank valve and tighten all connections.
NEVER USE A FLAME TO CHECK FOR LEAKS.
Figure 5
6.
Slide the tank drawer out, place the LP tank (not provided) in the drawer and secure it with the chain.
With the BLACK lever in the down position as shown in Figure 6, firmly push the regulator onto the
tank valve. To open the valve, Lift the BLACK lever and turn the handle 90
°
clockwise to the
“
ON
”
position. See
Figure 7. Apply a solution of soapy water to the tank-regulator connection and to the valve-hose
connection to check for leaks. If soap bubbles continue to form, the connection has a leak. If a leak is
found, close the tank valve and tighten all connections.
NEVER USE A FLAME TO CHECK FOR
LEAKS.
In case of gas leakage; for instance : in the event of gas leakage, the appliance shall not be
used or if alight, the gas supply shall be shut off and the appliance shall be investigated and rectified
before it is used again.
To remove the regulator, turn the Black Lever counter-clockwise and press straight in. See Figure 8.
Black Lever
Figure 6 Figure 7 Figure 8
