Costar CCI2525R, Installation Manual

Page: 11 / 20

Part 1 – Introduction
11
Power Connector
DC12V + Power connection
I/O Connector
Audio
In Audio In
GND Grounding
OUT
Audio Out
GND
Grounding
Alarm
COM
Common
NO
Alarm Out (Normally
Open)
AI1
Alarm In
GND
Grounding
The table below shows the network cable specifications.
<The network cable specifications>
Item Content Note
Connector RJ-45
Ethernet 10/100 Base
10/100
Mbps
Cable UTP Category 5e
Maximum
length
100m
PoE IEEE 802.3at, Class 4
• When switching over from 12 VDC to PoE as the
power source, the system can be rebooted.
• Organize the power cable so that it will not cause
people to trip over or become damaged from chairs,
cabinets, desks, and other objects in the vicinity. Do
not run the power cable underneath carpet or a rug
or plug the cable into a power outlet shared by a
number of other devices.
LED Status Indications
LED Status Description
Power LED
Off
Power not
connected
On Powered on
Network LED Flashing
Connected to
network
Installation
Product color and design may vary depending on the
model.
• Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or
ceiling is not strong enough to support its weight.
• Install the camera in a shaded area. If the camera is
installed in direct sunlight, it may affect adversely.