Costar Video Systems D&N series, Owner'S Manual

Page: 14 / 32

20 21
- As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
- If necessary, you can connect the monitor to the REMOTE jack on the back of
your camera.
- Only connect the cable when the power is turned off.
- Set the 75
Ω / Hi-Z selection switch as shown below if you have an intermediate
device.
1) Connection to Monitor
2) Connection to Power
Connect the adaptor to the power input connector as shown in the following figure .
The Standard voltage for camera operation : DC 12V ± 10%, AC 24V±10%.
Note
DC12V Only
Standard Camera Standard Camera