HD Matrix User Manual
24
Following the network scan any ONVIF compliant cameras will be shown on
the list. Click
“Authenticate” and verify by scrolling to the right of the Probe Results
window that the cameras show Success for Authentication.
If they show Fail, enter the correct credentials and try again.
Select the verified cameras one by one or as a group (hold shift key down)
and click “Add” to add them to the ONVIF list. Figure 4.9 shown as below.
Fig 4.9 ONVIF access
Camera name, User name and Password can be modified when a camera is
selected. Double Click on each field and enter the description or credentials.
Click “+” to manually add a camera configuration line, enter the camera IP
address that needs authentication.
Click “-“ to manually delete the selected camera configuration line.
Note: Default User name and Password while authenticating is
“admin”.
