HD Matrix User Manual
11
Part 3 Installation and connections
HD IP Matrix is designed according to a standard
19” rack structure. It
has 1RU and 4RU chassis configurations. When installed in standard
19” rack,
you should observe certain spacing away from other equipment for adequate
ventilation.
All connection ports are installed on the rear facing panel. Do not apply
power until all connections are made and verified.
Note:
1. Please read this manual carefully before terminating any connections or
applying power to the equipment. Improper connections or voltage
settings may result in permanent damage.
2. The power must be grounded to prevent shock or permanent damage,
endangering human safety.
NOTE:
This user manual reflects the connection and operation of the CVI8XM
4RU chassis. The same software principles and operation also apply to the
CVI4MV2 and CVI2MV2 units.
