Part 1 – Introduction
17
Installation
•
Check the wall or ceiling to see if it needs to be
reinforced. The camera may fall off if the wall or
ceiling is not strong enough to support its weight.
•
Install the camera in a shaded area. If the camera is
installed in direct sunlight, it may affect adversely.
Use the provided guide pattern to check the distance
between the screws.
Vandal Dome Model
1
Use the screws, anchor provided with the camera to
secure the bottom cover on a wall or a ceiling.
Attach the enclosed desiccant in the body to
prevent moisture.
2
Connect external devices, the network cable, and
the power adapter.
Make sure to shut the side cable hole using the
PT 1/2- inch cable cap for waterproof if the hole
is not used.
3
Adjust the angle of the lens. For more information,
refer to the
Angle Adjustment
.
Plastic Dome Model
1
Turn the camera body to align the protrusion on its
back with the base's reference point.
If the protrusions are not aligned with each other,
the screw holes are not revealed.
Summary of Contents for CDI2110VIRFH
Page 1: ...Network Camera Installation Manual ...
Page 26: ......
