Part 1 – Introduction
15
•
Check your local laws and regulations on making
video or audio recordings. The user will be held
liable for any violation of the law. (Article 25-5 of
the Personal Information Protection Act: Operators
of image data processing devices may not operate
such devices for purposes other than as originally
intended during device installation, place such
devices at locations other than as originally
intended, or use such devices to record audio.)
•
When switching over from 12 VDC to PoE as the
power source, the system will be rebooted once the
power adapter is disconnected.
•
Ground the power port's frame ground terminal
before use.
•
Organize the power cable so that it will not cause
people to trip over or become damaged from chairs,
cabinets, desks, and other objects in the vicinity. Do
not run the power cable underneath carpet or a rug
or plug the cable into a power outlet shared by a
number of other devices.
•
To reduce electromagnetic interference, wind the
camera-side end of the network cable through the
core (Laird Technologies, 28A2024-0A2) provided
with the product.
Ferrite Core
Input/output cable
Installation
Installation of this product does not require the use of
special tools.
For more information on other devices comprising the
overall system, refer to their respective
installation
manuals
.
Product color and design may vary depending on the
model.
Removing the Dome Cover
Vandal Dome Model
1
Loosen the screws counterclockwise using the allen
wrench provided with the product.
2
Remove the dome cover.
Summary of Contents for CDI2110VIRFH
Page 1: ...Network Camera Installation Manual ...
Page 26: ......
